Special Screws
|
*NEWS: Since I have had so many requests for a permanent Collar; As of 06-12-00 the new One-Way screws will be available for all sizes of this design. These screws are made to go in with a standard flat screwdriver, and are very difficult to remove without harming the jewelry piece. When ordering, specify these screws if you are interested, and add $2.00 to your order to cover the cost of the screws. |
|
*NEWS: "Somewhere between standard "Allen wrench" and "One-Way" screws, there must be a middle ground", my customer screamed. "We want to have a special tool to remove our screws, something that you can not get at the local hardware store."....Ok you asked for it....07-06-00 a "Spanner" or "Snake-Eye" screw is available in a #6-32 screw size (see bracelet image #2 below). #6-32 is normally found on the 8mm and 12mm versions of this design. These screws take a special spanner type tool which can also be purchased from me. When ordering, specify these screws if you are interested, and add $3.00 for (4) screws and $7 for each tool. |
| 12mm w/Standard Button Head Screws |  |
 | 6mm w/Spanner Screws |